Reading the IzoT Router LED Indicators
- Sacha Parisot (Unlicensed)
Owned by Sacha Parisot (Unlicensed)
06-Jun-2022
1 min read
Loading data...
The following figure is the top face of the IzoT Router.
The following tables describe the LED indicators for each LED on the IzoT Router’s face.
Status / Wink LED
| Color/State | Description |
|---|---|
| Blue | IzoT Router running with no faults. After initial power up, or a restart, the Status/Wink LED will change to purple, followed by flashing purple, and then blue once initialization is complete. |
| Purple | Initial start up |
| Purple Flashing | Start up |
| Red | Fault |
The IzoT Router passes through the reported states from the LON interface from Application-less to Configured. These are shown in the following LED colors and patterns.
Service / Connect LED
| Color/State | Description |
|---|---|
| Off | Configured state—LON interface running with an application and a LON network address |
| Yellow | Application-less state—no application opened the LON network interface |
| Yellow Flashing | Unconfigured state—the LON network interface does not have a configured LON address |
| Red Flashing | Factory reset in process |
LAN Activity LED
| Color/State | Description |
|---|---|
| Blue Momentary On | Router transmitting or receiving LAN packets |
LON LED
| Color/State | Description |
|---|---|
| Blue Momentary On | IzoT Router received a LON packet |
| Green Momentary On | IzoT Router transmitted a LON packet |