SmartConnect (Custom Hardware)
SmartConnect is available with SmartServer 4.2 and higher.
This section describes how to troubleshoot the following SmartServerConnect conditions:
- Error Message "This module requires administrative access... " Appears
- Licenses for SmartConnect 4.5 Update 1 and 2 Are Not Working
- LON Error "Failed to get transceiver type..." Appears
- Network Interfaces Are Not Enabling/Disabling
- Password Change is Needed for SmartConnect
- Raspberry Pi / SmartConnect IP Address Needs To Be Resolved
- Remote Mode with EnOcean IoTC Needs To Be Manually Started for SmartConnect
- SmartConnect Requires Reboot
- SmartConnect Requires Reset to Factory Defaults
- Storage Manager Needs To Be Started for SmartConnect 4.5 Update 1
, multiple selections available,