/
Loading an Application in Flash

Loading an Application in Flash

You can download an application to the non-volatile flash memory on a CPM 4200 EVB. Once loaded, you can power-cycle the CPM 4200 EVB and the application that you dowloaded will restart.

To download an application to CPM 4200 flash, follow these steps:

  1. Close any open debug sessions and terminate the OpenOCD tool if it is running.

  2. Attach the CPM 4200 EVB to your computer with a USB cable.

  3. Click the Load CPM 4200 button on the Eclipse toolbar and then select the application to be loaded. The application image files have a .bin extension. The selected application is loaded into flash on the attached CPM 4200 EVB.

  4. When prompted, click OK to load the application. The CPM 4200 SDK download the application and displays an Application Firmware is Loaded message when the download is complete.

  5. Click OK to close the message.

Related content

Building, Loading, and Debugging an Application in RAM
Building, Loading, and Debugging an Application in RAM
More like this
Restoring Factory Defaults on a CPM 4200 Device
Restoring Factory Defaults on a CPM 4200 Device
More like this
Creating a New Debug Configuration
Creating a New Debug Configuration
More like this
Creating a New Project
Creating a New Project
More like this
Installing the IzoT CPM 4200 Wi-Fi SDK
Installing the IzoT CPM 4200 Wi-Fi SDK
More like this
IzoT CPM 4200 Wi-Fi SDK Software Download
IzoT CPM 4200 Wi-Fi SDK Software Download
More like this