Getting Started

Owned by Sacha Parisot (Unlicensed)
Last updated: 11-Sept-2022 by Nina Cardillo (Unlicensed)

This page describes your first steps to start using the i.LON 700, the i.LON 700 configuration procedures, and common maintenance tasks that you can perform during your ongoing use of the i.LON 700.

Installation and Setup

Before you can begin using the i.LON 700, you need to perform a number of tasks to properly setup your i.LON 700 for your environment. These tasks are:

  1. Install the i.LON 700 hardware
    This section describes the physical installation and connections required for the i.LON 700.

  2. Connect to the i.LON 700
    This section describes how to find the i.LON 700 IP address and how to connect to the i.LON 700 console port. 

System Configuration

  1. Configure the i.LON 700
    This section describes how to configure the i.LON 700 system, network, features, and LonTalk authentication settings using the Configuration UI. It also describes how to change the i.LON 700 password, reset to the i.LON 700 to defaults, reboot the i.LON 700, and update the i.LON using the Configuration UI.

  2. Manage the i.LON 700 Host IP Address
    This section describes how to manage the i.LON host IP address.

  3. Configure the LON Remote Network Interface (RNI)
    This section describes how to use the RNI in the i.LON 700.

  4. Configure LON Routers
    This section describes how to use the the IP-852 router in the i.LON 700.

  5. Configure the LON/IP-852 Configuration Server
    This section describes how to use the IP-852 configuration server in the i.LON 700.

  6. Manage LON Addresses
    This section describes how to manage LON addresses.

System Maintenance

The following topics describe how you can maintain your i.LON 700 to ensure continued reliable installation. 

  1. Update the i.LON 700 Software
    This section describes how to update and re-image the i.LON 700 through the console (see Update with the i.LON 700 Console) or using the Configuration UI (see Update with the i.LON 700 Configuration Page).

  2. Reboot the i.LON 700
    Describes how you can reboot the i.LON 700 using the Configuration UI.

  3. Reset to i.LON 700 Factory Defaults
    Describes how you can restore the i.LON 700 configuration to the state the i.LON 700 was in when it was first manufactured using the Configuration UI.

  4. Migrate from the i.LON 600 to the i.LON 700
    This section describes how to migrate from the i.LON 600 to the i.LON 700. Â