/
Mount the i.LON 700
Mount the i.LON 700
The i.LON 700 mounts to a 35mm x 7.5mm or 35mm x 15mm DIN rail (also known as a TS35 rail). The rear of the i.LON 700 enclosure contains a spring-loaded DIN rail lock, which securely grabs the DIN rail on which the enclosure is mounted. To release the enclosure from the DIN rail, insert a flathead screwdriver into the DIN rail locking tab and gently pull the tab downwards and away from the enclosure. The following figures display dimensions of the i.LON 700 from the top and side. All units are in inches and millimeters.
, multiple selections available,
Related content
Mount Your SmartServer IoT
Mount Your SmartServer IoT
More like this
Installation and Setup
Installation and Setup
More like this
Installation
Installation
More like this
i.LON 700 User's Guide
i.LON 700 User's Guide
More like this
Hardware
Hardware
More like this
Update the i.LON 700 Software
Update the i.LON 700 Software
More like this